Position: Home » technical article » milling machine lubrication

technical article

milling machine lubrication

time:2011-10-27

Milling machine longevity is largely determined by the lubrication of milling machine lubrication.
(1) must be in strict accordance with the requirements of milling lubrication, oil should be clean, no acid, no water and durum and so on. Recommended N46 # oil.

(2) vertical milling machine should be lubricated three times per months and one time per half a years after the use of 3 years.

(3) the lubrication of horizontal and vertical milling machine , guideway ball screw, etc should be lubricated 4 times per day, done by every shift in the day and night.

(4) other parts required lubrication is equipped with oil cups, filling each class at least four times per day.

article Source: milling machine